Meridian Decks? is a prime choice for outdoor decks due to its high durability and resistance to decay. This tropical hardwood has a reputation for withstanding the harsh conditions endured by docks, wharfs, and harborways as well as by residential and commercial decks. Manufactured from Shorea maxwelliana, this species receives a ranking of High (II) Durability and is rated as Resistant/Very Resistant to decay. Production of this exotic hardwood is managed under the the stewardship of the International Tropical Timbers Organization sponsored by the United Nations.wood plastic composite production process Kiln Dried Stability Durable tropical hardwoods are dense and release internal moisture over a longer period of time than cedars or pines. As these exotic hardwoods dry, some movement and checking will naturally occur. To minimize this normal process in MeridianDecks?, all components are kiln dried to extract the moisture in a more controlled manner.

This procedure also makes the wood more receptive to absorbing the factory applied stain. Custom Designs Meridian Decks? defines a new, sophisticated look for today's decks. Meridian Decks? offers a full package of elegant accessories with fresh, sleek profiles for a design statement of both ease and style. The profiles have a contemporary feel while still exhibiting clean, classic good looks. Appealing rail designs can be created easily using the handsome custom milled handrails, balusters, bands, and post top.Moisture control and adequate ventilation is crucial to the performance of a deck. 1. Clear rocks and debris from area under deck and plan for good air ventilation. 2.composite lattice panels Grade site for proper drainage. Slope grade away from building. Install drainage routes or drain pipes if necessary. 3. Vegetation under a deck retains moisture and releases it to the underside of a deck. Remove vegetation and lay down landscape fabric. Construction Advice For the best visual results and consistent performance, the complete deck and rail system, plus additional design features, should be designed with the Meridian Decks?

package of decking - handrails, balusters, post, top, baluster band and skirt trim. As with all contstruction,local building codes must be consulted during the design phase. Choose a carbide tip blade for making cuts in dense hardwoods like Meridian Decks?. Seal all end cuts. Use a product like Anchor Seal? or a Penofin? oil stain. Fasten decking with screws, not nails. The recommended installation calls for predrilling using a 5/32" drill bit to be compatible with the suggested fastener: wood plastic composite in india a #7 x 2 1/4" Swaneze Finish Screw 305 Stainless Steel. Use two fasteners per board at the intersection of each joist. To avoid splitting, place each screw approximately 1 1/8" from the edge of 1 x 4 decking or 1 1/4" to 1/1/2" from the edge of 5/4 x 6 decking. Minimize any recesses where water might collect. Because Meridian decking is kiln dried, a minimum space of 1/8" should be maintained between boards.