superhouse aluminium windows
The doors and windows of the house should be the ones we use more frequently, and they are also the more easily damaged parts of many houses. Ash accumulation and deformation are the main reasons for the difficulty of sliding doors and windows of the system. Keep the door frame clean, especially keeping the position of the sliding slot of the door and window clean. Vacuum cleaners can be used to remove large amounts of ashes from grooves and door seals.

System door and window maintenance skills:

1. When using aluminum alloy doors and windows, they should be light and natural to push and pull: if you find it is difficult to push it, it is not difficult to push, you should first eliminate the existence of the fault.

2. When cleaning the doors and windows of the system, try not to step on the aluminum frame or use the pull frame as a support.

3. You can choose soft cloth with water or neutral detergent for the doors and windows of the system. Do not use ordinary soaps and detergents, detergents, essences and other strong acid detergents.

4. After the rainy day is over, dry the wet glass and door and window frames in time, and pay special attention to the water in the chute. The friction of the chute will increase after a long time. You can add a little engine oil or apply a layer of fire wax oil.

5. Frequent inspections and the connection of different parts of the aluminum alloy structural frame should be carried out, and the bolts should be tightened in time to replace damaged parts. The vulnerable parts of the doors and windows of the system design such as positioning shaft pins, wind braces, and floor springs should be checked frequently, and regular lubrication must be kept clean and flexible.

6. The sealed wool and glass seal is the key to ensure the sealing structure of doors and windows. If there is a leak, it needs to be repaired and replaced.

7. Frequently check the joints between the aluminum alloy frame and the wall. If there is any looseness over time, it will easily deform the frame as a whole, making the doors and windows unable to be closed and sealed. Therefore, if the screws of the joint are loose, they should be tightened immediately. If the screw feet are loose, apply a small amount of cement to seal with epoxy super glue.

awning windows pros and cons
glass panel bifold doors
are window sills replaced with new windows
aluminium stacking doors price check